3. Disassembly and Reassembly
3-5 Replacing the Burner Cup
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Locking Clip
& Electrode
Injector
Tube
Burner Cup
Locking Clip
1.
Turn off the electrical supply going
to the range.
2.
Shut off the gas shut-off valve in
the gas supply line to the range.
3.
Remove the frame cooktop.
4.
Using a tubing wrench on the
wrench on the burner cup base,
while disconnecting the gas line.
5.
To remove the electrode from
Electrode
the cup, squeeze the two outside
edges of the clip under the
electrode together while pulling to
remove the locking clip. Slide the
electrode and the wire from the
cup. The burner cup can now be
removed.
16