Replacing The Burner Bake - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly

3-18 Replacing the Burner Bake

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Burner Bake
CONNECTOR
CAVITY FLOOR
BRACKET
BAKE SPREADER
1. Turn off the electrical supply going to
the range.
2. Shut off the gas shut-off valve in the gas
supply line to the range.
3. Open the oven door and remove the
racks from inside the oven.
4. Pull on the wires or the connector
until the wire connector appears from
the back wall of the warming drawer
opening.
5. Disconnect the connector on the burner
bake HSI.
6. Remove the two screws from the back
7. Remove 2 screws from the front of the
bracket bake-spreader.
8. Lift the front of the bracket bake-
spreader and lift out the bracket-bake
spreader.
9. Lift up the burner bake from the holder-
bake burner on the bottom of the
drawer.
31