Removing And Replacing The Door - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly

3-11 Removing and Replacing the Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Door
(Removal)
Door
(Replace)
1. Fully open the door
2. Pull the hinge locks downward
3. Firmly grasp both side of the door
at the top.
4. Close door to the door removal
degrees. Lift door up and out until
the hinge arm are clear of the slot.
1. Firmly grasp both sides of the door
at the top position.
2. Fully open the door. (If the door
will not fully open, it means that
the indentation is not seated
correctly in the bottom edge of the
slot. Push the hinge locks up to the
locked position.)
3. Close the oven door.
23