Table of Contents
Advertisement
TANDBERG MPS User Manual
.1 Rack Mounting
The TANDBERG MPS comes with 4 screws and 4 nuts for mounting in standard 19" racks. The chassis is equipped
with brackets.
Before starting the rack mounting, please make sure the TANDBERG MPS is placed securely on a hard, flat surface.
1. Disconnect the AC power cable.
2. Make sure that the mounting space is according to the 'Installation site preparations' in the previous section.
3. Insert the chassis into a 19" rack, and secure with screws in the front (four screws) and nuts (four nuts).
1
D13373.04
Advertisement
Table of Contents
