Unpacking And Mounting - TANDBERG Maestro MXP User Manual

2.1 Unpacking and Mounting

1 Unpacking
The TANDBERG Maestro is delivered in one transport case with all components inside. Remove
the case in the order shown on Figure 1.
Figure 1
2 Mounting of the camera
Mount the camera as shown in figure 2.
Figure 2
3 Open the back of the system
For access to the cables, microphones and remote control, remove the back cover as shown in
Figure 3. The codec cover and the back cover are both held in place by magnets.
The accessories box contains:
Wave II camera
2x Table Microphones
Remote Control and Tracker with batteries
Documentation
Cables for external displays
Installation
23