Advertisement
d. Crimp the RJ-45 connector onto the RJ-45 network cable. Note that the
wires should be placed into the RJ-45 connector based on the following
order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
Alarm IO PIN Assignment
Reset Button
The Reset Button can be used to restore the camera to factory default. When
the camera is powered up, press the Reset Button about 10 seconds to reboot
the camera.
1
Alarm In
GND
2
3
COM
4
Alarm Out
10
Advertisement
