Advertisement
4. Screw the Camera Base to the surface using the supplied 3 Screws.
Place the camera body back to the Camera Base and twist back the Outer
Housing. Do not twist the Outer Housing too tight as you will have to adjust
camera angles while viewing camera live view.
5. Connect the camera to the network. See 5. Cables.
6. Connect the camera to power. You can either connect the camera to a 12VDC
power source or to a PoE switch using the PoE cable.
7. Adjust camera angles and then tightly twist back the Outer Housing.
8. Access the camera live view. See 7. Accessing the Camera.
7. Accessing the Camera
You can look up the IP address of the IP camera using the IP Utility (IPU)
program from
EverFocus website
The default network is DHCP. However, if there is no dynamic IP address
assigned to the device, its IP will switch to 192.168.0.10. By default, the ID is
admin and there is no password. Please input a password for the first-time login.
(key word search: "IP Utility").
16
Advertisement
