How To Reset The Unit - Oregon Scientific RMR966PA Instruction Manual

Projector Features
Feature
Effect
Adjustable Rotates the
Projection projection 180°
FOCUS Focuses
Knob projection
Dial C3 rotates
IMAGE
projection
ROTATION
KNOB
°
180 Button
ROTATION C1horizontally
BUTTON flips the
projection 180°
For continuous projection, you must connect it with power adapter.
When the power adapter is connected to the unit, the projection will
be activated and remain
[PROJECTION ON ] switch.
To deactivate the feature, slide the switch back to its off position.
To increase the life-time of the projection LED, it is suggested to
slide the [ PROJECTION ON
during daytime.
Instructions
Tilt swivel projection
housing to alter the
direction of projection
Rotate Dial C2 to focus
projection
Rotation of projection
allows user to place
clock in convenient
Flips an image to
maintain an upright
position
so by sliding on the
] switch to the "off" position
Section V — Others
BACKLIGHT
To turn on the EL backlight of the LCD Display, press
[SNOOZE/LIGHT] to turn it on for 5 seconds.

HOW TO RESET THE UNIT

Press [RESET] to reset the settings when the unit is malfunctioning.
When [RESET] is pressed, all settings will return to the default
values and memory records will be erased.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch
the plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
14