Oregon Scientific RMR966PA Instruction Manual page 9

ALARM & PRE-ALARM FUNCTION
This unit has two alarms (Alarm-1 and Alarm-2) which can be
operated together or independently.
To activate or deactivate the alarm, press the [
when the respective alarm is being displayed. "-:--" will be shown
when the alarm is being deactivated. [
when the respective alarm is activated.
When an alarm is activated, it will go off at the preset time. The EL
backlight and projection will activate for 5 seconds and the alarm
sounds will be given out for 2 minutes.
To stop the alarm, press any key. When the [SNOOZE/LIGHT]
button is pressed to stop the alarm sound, the snooze function will
be activated and the alarm will go off again after 8 minutes. To
disable the snooze function, press and hold the [SNOOZE/LIGHT]
button for 3 seconds or press other key to stop the alarm sound.
If a second alarm goes off when the first alarm is sounding off, the
first alarm will be disabled automatically.
(a) To set the alarm:
1. Press the [ALARM/*] button once to select Alarm-1 or again
to select Alarm-2.
9
] or [ ] button
] or [ ] will be shown