2: Installing The Evs-Vcm; 3: Connecting The Evs-Vcm To The Sbus - Honeywell SILENT KNIGHT EVS Series Manual

EVS Device Installation
4.2.2 Installing the EVS-VCM
1. Open the cabinet door and the dead front panel.
2. Remove AC power and disconnect the backup batteries from the main control panel.
3. Align the EVS-VCM over the mounting studs in the middle section of the dead front panel and secure with the six supplied nuts with
lockwashers. Refer to the figure below for mounting locations.
Back view of 5820XL-EVS Dead Front Panel
4.2.3 Connecting the EVS-VCM to the SBUS
Refer to Figure 4.4 below to properly connect the EVS-VCM to the FACPs SBUS.
See Section 4.10 for instruction on how to set SBUS addressing.
14
+
EVS-VCM
+
+
+
+
EVS-SW24
Figure 4.3 EVS-VCM Mounting Locations
EVS-VCM
FACP
Figure 4.4 EVS-VCM SBUS Connections
Back view of 6820EVS Dead Front Panel
+
+
+
EVS Series Manual — P/N LS10062-001SK-E:D 3/15/2022
Installing the EVS-VCM
+
EVS-VCM
+
+
+
+
EVS-SW24
supervised,
power-limited
Class B