3: Mounting The Evs-50Wbd Board Only - Honeywell SILENT KNIGHT EVS Series Manual

EVS Device Installation
5. Install remaining fasteners and tighten.
Figure 4.10 Amplifier Cabinet Flush-Mount Dimensions and Mounting Hole Locations
4.3.3 Mounting the EVS-50WBD Board Only
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinance
1. Ensure AC and DC power have been removed from the panel.
2. If this module is a replacement for an existing EVS-50W, remove the seven screws which secure the board to the enclosure.
3. Align the mounting holes over the PEM standoffs in the back of the cabinet.
4. Secure the board to the enclosure with the screws removed in step 2.
18
24.75"
mounting holes
14.5"
11"
mounting
key holes
bottom
EVS Series Manual — P/N LS10062-001SK-E:D 3/15/2022
Installing the EVS-50W