Compaq Deskpro 2000 Maintenance & Service Manual page 260

Table H-2 shows which configurations of ×8 and ×32 DIMMs are supported.
1
×8
×8
×8
×8
×32
×32
×32
×32
None
×32
None
×8
Note: ×4 DIMMs are not supported in any slot or configuration.
With a ×32 DIMM in slot 3, a ×8 DIMM is NOT supported in either slots 1 or 2. All other
combinations of DIMMs (with the exception of the ×4's) are supported.
If the ROM encounters a ×4 DIMM or any of the unsupported ×8/×32 combinations in the system
during POST, the ROM will issue a "213 – Incompatible DIMM in Slot x,x,x" error message and halt
the processor (the system will not boot). The "x" in the error message equals the slot number(s) of
the incompatible DIMM(s). If an unsupported configuration is found, the solution is to replace the ×4
DIMM or move the ×8/×32 DIMMs into a supported configuration.
Table H-2
Supported Memory Configurations
DIMM SLOT
2
×8
×8
×32
×32
×8
×8
×32
×32
×32
None
×8
None
3
×8
×32
×8
×32
×8
×32
×8
×32
×8
×8
×32
×32
Compaq Deskpro 2000 Series of Personal Computers
Supported
Configuration
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
No
No
H-3