7.1.2
Switch Settings
The following figures and tables identify the switch settings for each processor frequency for the
Pentium and Pentium II system boards.
CAUTION: Do not configure the system board to operate faster than the speed at which the processor is
rated. Doing this could result in unreliable operation or processor damage.
Figure 7-3. SW1 Module Location, Pentium System Board
S1
S2
OFF
OFF
OFF
ON
ON
OFF
ON
ON
* Standard bus speed for all Compaq Deskpro 2000 Series of Personal Computers.
** With bus speed set to 66 MHz.
Table 7-3
Pentium System Board SW1 Settings
Bus Speed
S3
60
OFF
66*
OFF
50
ON
reserved
S4
OFF
ON
ON
Compaq Deskpro 2000 Series of Personal Computers
Processor Speed**
233
200
166
7-5