Table of Contents
Advertisement
Chapter 2
Chapter 2
Getting Started
When purchased the batteries included are for store demonstration purposes only. If the display or sound is weak
and unclear, please replace the batteries as indicated below.
Battery Installation
1. Make sure the unit is switched off.
2. Using a Phillips screwdriver, open the battery cover
at the back of the unit.
3. Insert 4 "AA" batteries. (Note the correct polarity: +,-)
4. Replace the cover.
Caution
• Different types of batteries or new and used batteries
are not to be mixed.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Remove all batteries when replacing.
• Remove batteries from the unit if the unit is not going
to be used for long periods.
• Do not dispose of batteries in fire.
Cleaning and Maintenance
The unit should be regularly examined for damage to the enclosure and other parts. In the event of such damage,
the unit must not be used until the damage has been repaired. Wip the unit with a clean dry cloth.
• Do not get the unit wet.
• Do not dismantle the unit.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
toy before being charged. (if removable)
• Rechargeable batteries are only to be charged under
adult supervision. (if removable)
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
3
Hide quick links:
Advertisement
Table of Contents
