Table of Contents
Advertisement
Chapter 6 - Configuration
Configure LoRa Gateway
30
LoRa Gateways acts as communication bridge between Honeywell
Versatilis Signal Scout and LoRaWAN application.
NOTE: There are many LoRa based Gateway manufacturers in
the market. Choose the LoRa gateway best suited to your needs.
For more information on how to set up the LoRa Gateway, refer
the respective manufacturer's product documentation.
Following are some common parameters for your reference that
needs to be configured for the LoRa gateway:
Functions
Key Parameters
Displays information such as Model Number,
Gateway Device
Serial Mumber, IMEI, Frequency Band, Gateway
Information
EUI, LAN, WAN, Ethernet, and etc.
User can verify these information by checking
the same on the sticker provided on the outer
panel of the gateway.
LoRaWAN/
Below information needs to be configured:
Network
Settings
Connection
The available connection options for connecting
Configuration
gateway to the LoRaWAN are Ethernet, Cellular,
or Wi-Fi. These options for configuring
connections are based on the gateway models as
offered by the manufacturer.
After gateway
Make sure the gateway is powered ON and
set up
connected to the internet. The status should
show as Connected in the LoRaWAN service
provider application.
LoRa Mode Selection: Packet Forwarder.
l
Make sure the status of Packet Forwarder
shows as "Running".
Network selection: E.g. Radio Bridge
l
ChirpStack, The Things Network, Senet, Loriot,
etc.
Frequency Plan selection
l
Advertisement
Table of Contents
