Table of Contents
Advertisement
Table 2-2: Best Practices - DON'Ts
DON'Ts
Do not remove the Signal Scout's enclosure without
written consent from Honeywell. The Signal Scout is
packaged with battery and sensitive electronics, that may
be damaged without proper care. Pay attention to don'ts
when the Signal Scout's enclosure is removed:
Do not short-circuit.
l
Do not disassemble or change.
l
Do not expose to heat or fire.
l
Do not use bare hands while installing the magnetic
adapter on the target structure as the magnet is powerful
and can pinch the skin/ fingers if not handled properly.
Do not mount the adhesive mount adapter on uneven,
rough, or curved surfaces as there is a potential risk of
falling down of the Signal Scout due to the lack of
sufficient bonding area.
Chapter 2 - Instructions and safety measures
9
Advertisement
Table of Contents
