Removing The Camera Module; Replacing The Camera Module - Dell Inspiron 1012 Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ 1012 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Camera Module
1. Follow the procedures in
2. Remove the battery (see
3. Remove the keyboard (see
4. Remove the hard-drive assembly (see
5. Remove the palm rest assembly (see
6. Remove the hinge cover (see
7. Remove the display assembly (see
8. Remove the display bezel (see
9. Disconnect the camera cable from the connector on the camera module.
10. Gently remove the camera module stuck to the display cover.
1 camera module
Replacing the Camera Module
1. Follow the procedures in
2. Use the alignment posts to place the camera module on the display cover.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Keyboard).
Removing the Hard-Drive
Removing the Palm Rest
Removing the Hinge Cover).
Removing the Display
Removing the Display
2 camera cable connector
Before You Begin.
UserManuals.info
Removing the
Assembly).
Assembly).
Assembly).
Bezel).
Battery) before working inside the