3Com EtherLink III User Manual page 25

If a protocol is missing, follow these steps:
a Select the protocol and click Add.
b From the Select Network Protocol menu, select
Microsoft in the left pane. In the right pane, select the
protocol and click OK.
If a client is missing, follow these steps:
a Select the client and click Add.
b From the Select Network Client menu, select
Microsoft in the left pane, select the client in the right
pane, and click OK.
11 For NetWare, on the Network screen, remove the
following network components, if present:
Microsoft Client for Microsoft Network NetBEUI
The network components should now include:
Client for NetWare Networks
3Com EtherLink III Adapter
IPX/SPX Compatible Protocol
If a protocol is missing, follow these steps:
a Select the protocol and click Add.
b From the Select Network Protocol menu, select
Microsoft in the left pane. In the right pane, select the
protocol and click OK.
If a client is missing, follow these steps:
a Select the client and click Add.
b Click Client for NetWare Networks and then Properties.
To select the NetWare server, follow these steps:
a Under the General tab, set your preferred server and
the first network drive and click OK.
b Set the primary network logon to Client for NetWare
Networks and click OK.
12 When the configuration is correct, click the
Identification tab.
The computer name is the name you use to log on to the
network and connect to your server. Give your PC a unique
name of up to 15 characters. The PC name cannot include
blank spaces.
Windows 95 3-3