Mitsubishi MELSEC AJ65BT-R2 User Manual page 152

Rs-232c interface module type
Hide thumbs Also See for MELSEC AJ65BT-R2:
Table of Contents

Advertisement

7 USING FRAMES WHEN EXCHANGING DATA
2) Transmission trigger conditions
The transmission trigger conditions designate the conditions
interpreted by the R2 as a data transmission trigger generation when
monitoring the monitor target statuses.
Monitor target
status
CC-Link data
link status
Programmable
controller CPU
operation
1
status *
Programmable
controller CPU
status
*1
When the parameters have been set with the GPP function or RLPA
command, the master station CPU's RUN/STOP status will be the
trigger generation conditions.
If the parameters have been set with the sequence program, the ON
or OFF of the master module's refresh indication (Yn0) will be the
trigger generation condition.
ON : CPU operation status running
OFF : CPU operation status stopped
*2
The CPU error will be the condition of generating a trigger for an error
related to the stopping of the CPU.
Refer to the CPU module User's Manual for details.
(c) Transmission data designation area (
1) When monitoring the device/status with the monitor target designation,
the designation destination of the data to be transmitted if the R2
detects the transmission trigger generation is designated.
2) For the transmission data designation, the head No. of the transmission
table in which the transmission data is designated and the transmission
table size are designated for the R2 transmission table ( R 2 122
185
).
H
~
b15
Head No.
Designate the No. of the transmission table, in which the data to be
transmitted is designated, with a number between 1 and 100.
Transmission table size
Designate the transmission table size, in which the data to be
transmitted is designated, with a number between 1 and 100.
Transmission trigger generation
condition setting
b14 = OFF
b14 = ON
Stopped
Linked
Running
Stopped
2
Error *
Normal
~
b8
b7
Head No.
Transmission
table size
7 - 18
MELSEC-A
Timing of transmission trigger
generation
The transmission trigger is
generated when the R2
detects a change in each
status.
,
,
⋅⋅⋅ F5
R 2 79
7B
H
H
b0
,
)
F7
H
H
to
H

Advertisement

Table of Contents
loading

Table of Contents