Profiles Pages Definitions - Grandstream Networks HT818 Administration Manual

Configuration
E911/HELD Protocol:
Enable E911
HELD Protocol
HELD Synchronization Interval
Location Server
Location Server Username
Location Server Password
Secondary Location Server
Secondary Location Server
Username
Secondary Location Server
Password
HELD Location Types
HELD NAI
HELD Identity 1-10
HELD Identity 1-10 Value
E911 Emergency Numbers
Geolocation-Routing Header
Priority Header

Profiles Pages Definitions

Profiles (1,2)
Activates / Deactivates the accounts. The FXS port configuration will not change if disabled, although the port will
Profile Active not be operational, in this state, there will be no dial tone when picking up the analog phone and making/receiving
calls will not be possible.
Configures SIP server IP address (Supports both IPv4 and IPv6 addresses) or domain name provided by VoIP
Primary SIP
service provider. (For example: sip.mycompany.com, IPv4:192.168.5.170, or IPv6: fe80::20b:82ff:fe75:211d). This is
Server
the primary SIP server used to send/receive SIP messages from/to HT81x.
Defines failover SIP server IP address (Supports both IPv4 and IPv6 addresses) or domain name provided by VoIP
Failover SIP
service provider. (For example: sip.mycompany.com, IPv4:192.168.5.170, or IPv6 fe80::20b:82ff:fe75:211d:). This
Server
server will be used if primary SIP server becomes unavailable.
configuration.
Enable Enhanced 911 call. Default is disabled
Configure HELD transfer protocol. HTTP or HTTPS
The valid synchronization interval is between 30 to 1440 minutes. The synchronization is off
when the interval is 0.
Configure the primary Location Information Server (LIS) address
Configure the user name of the primary Location Information Server (LIS)
Configure the password of the primary Location Information Server (LIS)
Configure the seconary Location Information Server (LIS) address
Configure the user name of the secondary Location Information Server (LIS)
Configure the password of the secondary Location Information Server (LIS)
Configure "locationType" element in the location request. "geodetic", "civic" and "location URI"
Configure "locationType" element in the location request. "geodetic", "civic" and "location URI"
HELD Identity
HELD Identity value
A user can configure multiple emergency numbers separated with the delimiter symbol ";".
If "Yes", E.911 INVITE message includes the "Geolocation-Routing" header with the value "Yes"
If "Yes", E.911 INVITE message includes the "Priority" header with the value "emergency"