Led Definition - Planet IGS-624HPT User Manual

z Auto-detects link status and redundant dual ports with the same connector
type
z When Primary Port is active, the Backup Port is blocked.
z When Primary Port link fails, the traffic swaps to Backup Port automatically.
z Once the Primary Port status is connected, the traffic will swap from Backup
Port to Primary Port.
z Using the Redundant mode, port 5 is defined as Primary Port and port 6 as
Backup Port.
Using the Redundant mode, port 5 is defined as Primary
Port and port 6 as Backup Port.
2.2 LED Definition:
 System
LED Color
P1 Green
P2 Green
Alarm Red
 Per 802.3at PoE+10/100/1000BASE-T Interface (Port 1 to Port 4)
LED Color
LNK/ACT Green
PoE-in-Use Amber
6
Light: Indicates power 1 has power.
Light: Indicates power 2 has power.
Light: Indicates either power 1 or power 2 has no
power.
Light: Indicates the Industrial Gigabit PoE+
Switch is successfully connecting to the network at
10/100/1000Mbps.
Blink: Indicates that the Industrial Gigabit PoE+
Switch is actively sending or receiving data over that
port.
Light: Indicates the port is providing DC in-line power.
Off: Indicates the connected device is not a PoE
powered device (PD).
Function
Function