LED
Switch Specifications
Switch Architecture
Switch Fabric
Throughput
(packet per second)
Address Table
Buffer Memory
Jumbo Frame
Flow Control
Power over Ethernet
PoE Standard
PoE Power Supply Type End-span
Power Pin Assignment
PoE Power Output
14
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Per 10/100/1000T RJ45 PoE+ Ports (Port 1~Port 4)
LNK/ACT (Green)
PoE-in-Use (Amber)
Per SFP Interface: (Port 5~Port 6)
1000 LNK/ACT (Green)
100/2500 LNK/ACT (Amber)
PoE Usage:
30W, 60W, 90W, 120W (Amber)
Store-and-Forward
18Gbps
13.39Mpps@64bytes
4K entries
1M bits on-chip buffer memory
12.2Kbytes
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus PSE
1/2(+), 3/6(-)
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power
supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~54V DC (depending on the power
supply), max. 36 watts