JVC G-code ShowView HR-S5900AM Instructions Manual page 51

AU D IO
PLAY
STO P
5
6
N O TES:
● When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the
mixed sound (Hi-Fi + Normal soundtracks), press
the remote control to select "
(
● Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
● Audio dubbing is also possible using the rear panel AUDIO
IN L + R connectors. When using these connectors, make
sure to select the correct input mode in step
● Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
● When playing back an audio-dubbed tape, press
the remote control to select the soundtrack you wish to hear
(
PAU SE
ST ART DUBBIN G
Engage the audio component's Play mode, then press
to start the tape in your recorder. Audio dubbing
PLAY
begins at this point.
● " " blinks and " " is displayed on the front display
panel.
● To stop dubbing temporarily, press
to resume dubbing.
PLAY
EN D AUDIO DUBBIN G
Press to stop the tape in your recorder, and
STO P
engage the audio component's Stop mode.
pg. 18).
pg. 18).
51
EN
. Press
PAU SE
on
AU D IO
NORM (HI FI + NORM)"
.
2
on
AU D IO