JVC G-code ShowView HR-S5900AM Instructions Manual page 25

Recording
ST ART RECO RDIN G
1
Press and hold
RECO RD
or press
RECO RD
D U RIN G B.E.S.T.
B.E.S.T. CO M PLETE
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
N O TES:
● The B.E.S.T. system works for both SP and LP or EP modes
only after a tape has been inserted and the Record mode is
first initiated. It does not work during recording.
● In the case of timer recording, the B.E.S.T. system works
before recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled.
The next time the cassette is used for recording, B.E.S.T. is re-
performed.
● Pressing the recorder's
RECO RD
displayed does not start Instant Timer Recording (
ATTEN TIO N
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
and on the remote are pressed, or
RECO RD PLAY
on the recorder is pressed. To make sure you record the
desired scene or programme in its entirety, first perform the
following steps:
Press and hold
1) PAU SE
RECORD PAUSE mode.
● The recorder then automatically checks the condition
of the tape and, after approximately 7 seconds, re-
enters RECORD PAUSE.
Press to start recording.
2) PLAY
● If you want to bypass the B.E.S.T. system and begin
recording immediately, set "B.E.S.T." to "OFF" in step
on page 24.
and press on the remote,
PLAY
on the recorder.
button while "BEST" is
RECO RD
and press to engage the
RECO RD
Pla yba ck
The recorder assesses the quality of the tape once you initiate
playback.
ST ART PLAYBACK
1
Press
● The recorder adjusts the playback picture quality
based on the quality of the tape in use.
● B.E.S.T. is active during Auto Tracking. "BEST" appears
blinking on the recorder's display panel.
N O TES:
● When watching a tape recorded with "B.E.S.T." set to "ON", it
is recommended that you leave B.E.S.T. on during playback as
well.
● When watching a rental tape or one recorded on another
video recorder, or when using this recorder as the player for
editing, set B.E.S.T. to your preference by performing steps
through
5
● "BEST" only appears at the beginning of automatic tracking.
Even though it doesn't appear after that, the B.E.S.T. function
is operative.
pg. 21).
4
.
PLAY
on page 24.
25
EN
1