JVC GR-AXM 270 Instructions Manual page 32

32
EN
Downloaded from:
Focus
detection zone
https://www.usersmanualguide.com/
RECORDING
Focusing
Auto Focus
The camcorder's Full Range AF system offers continuous
shooting ability from close-up to infinity. However,
correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
• When two subjects overlap in the same scene.
• When illumination is low. *
• When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-color wall,
or a clear, blue sky. *
• When a dark object is barely visible in the viewfinder. *
• When the scene contains minute patterns or identical
patterns that are regularly repeated.
• When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
• When shooting a scene with a high-contrast
background.
* The low-contrast warning "
N O TES:
● If the lens is smeared or blurred, accurate focusing is
not possible. Keep the lens clean, wiping with a piece
of soft cloth if it gets dirty. When condensation occurs,
wipe with a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom-out
first ( pg. 20). If zoomed-in in the auto focus mode,
the camcorder could automatically zoom out depend-
ing on the distance between the camcorder and the
subject. When Tele Macro (
camcorder will not zoom out automatically.
Advanced Features (cont.)
" appears.
pg. 30) is activated, the