JVC GR-AXM 270 Instructions Manual page 22

22
EN
DATE/ TIM E
Select D ial
Date display
Time display
Date/Time display
Auto Date Record mode
Date-off mode (No display)
Date display
DEC 25.98
Time display
PM10:50:00
Date/Time display
DEC 25.98 PM10:50:00
Downloaded from:
D isplay
Auto Date Record mode
AUTO DATE
Auto date record mode
DEC 25.98
Auto date record
executed
https://www.usersmanualguide.com/
RECORDING
FEATU RE: D ate/ Time Insert
To display the date and time on the
PU RPO SE:
LCD monitor, in the viewfinder, or
on a connected color monitor, as
well as to record them manually or
automatically.
1) Turn the Select Dial to any
O PERATIO N :
position except AUTO LOCK.
2) Choose a display mode by
pressing DATE/ TIM E repeatedly
while in Record-Standby to cycle
through the modes as shown in the
illustration at left.
You should have already
performed the Date/Time Setting
procedure (
haven't, do so first.
N O TES: D ISPLAY
● The selected display can be
recorded.
● If you don't want to record the
display, select the Date-off mode
before shooting.
● If you want to delete the display
during shooting, press DATE/ TIM E .
● To recall the display, engage the
Record-Standby mode and press
DATE/ TIM E repeatedly until the
desired display appears.
AU TO DATE RECO RD
● Your camcorder automatically
records the date for about 5
seconds after recording is initiated
in the following situations:
After changing the date.
•
After loading a cassette.
•
After Auto Date Record mode is
•
selected by pressing DATE/ TIM E .
In this mode, the date is replaced
after 5 seconds with "AUTO DATE"
but this is not recorded.
● Setting the Select Dial to AUTO
LOCK always engages the Auto
Date Record mode, and disables
all other modes.
Basic Features (cont.)
pg. 11). If you