DIGITAL VIDEO CAMERA GR-DX300 GR-DX100 GR-DX95 GR-DX75 Please visit our Homepage on the World Wide Web for Digital Video Camera: http://www.jvc-victor.co.jp/english/cyber/ For Accessories: http://www.jvc-victor.co.jp/english/accessory/ INSTRUCTIONS ENGLISH CONTENTS AUTOMATIC DEMONSTRATION GETTING STARTED 7 – 11 TAPE RECORDING & PLAYBACK 12 – 16 MEMORY CARD RECORDING &...
SAFETY PRECAUTIONS SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT PROVIDED ACCESSORIES HOW TO ATTACH THE LENS CAP HOW TO ATTACH THE CORE FILTER AUTOMATIC DEMONSTRATION GETTING STARTED Power ... 7 – 8 Grip Adjustment ... 8 Viewfinder Adjustment ... 8 Tripod Mounting ...
However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the JVC BN-V107U/V114U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord.
The following notes concern possible physical damage to the camcorder and to the user. Do not carry or hold the camcorder by the viewfinder and/or the LCD monitor as this can result in dropping the unit, or in a malfunction.
In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
Core Filter. Stopper When connecting cables, attach the end with the Core Filter to the camcorder. Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch and no cassette is in the camcorder.
Viewfinder on Read the kit's instruction manual before using. 1 hr. 25 min. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or 2 hrs. 55 min. BN-V856U battery packs to the camcorder and supply power directly to the camcorder.
• Unplug the AC Adapter from the AC outlet. • Detach the battery from the camcorder. This camcorder will be automatically turned off if its power is supplied from the AC adapter and about 5 minutes pass since it has entered into the recording standby mode with a cassette inserted.
Tripod Mounting CAUTION When attaching the camcorder to a tripod, extend its legs to stabilise the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over. To attach the camcorder to a tripod, align the screw to the mounting socket on the camcorder.
Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder. Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede.
Close the card cover To Unload A Memory Card: In step 3 push the memory card, which then comes out of the camcorder automatically. Pull it out and close the card cover NOTES: Be sure to use only SD Memory Cards marked “...
NOTES: If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor. pg. 34) and When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape.
Power-Linked Operation When the Power Switch is set to “ also turn on/off the camcorder by opening/closing the LCD monitor or pulling out/pushing in the viewfinder. To produce the zoom in/out effect, or an instantaneous change in image magnification.
When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “RECORDING FROM THE MIDDLE OF A TAPE”...
... press 5 NOTES: In step 3, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.
Basic Shooting (Snapshot) You can use your camcorder as a digital still camera for taking snapshots. Perform the procedures listed below before continuing. Power ( pg. 7) Grip Adjustment ( pg. 8) Viewfinder Adjustment ( pg. 8) Loading A Memory Card ( pg.
These thumbnail images cannot be transferred to a PC. Images shot with devices (such as JVC GR-DVX7) that are not compatible with DCF cannot be viewed with this camcorder; “UNSUPPORTED FILE!” will be displayed.
Auto Playback You can run through all the images stored on memory automatically. Perform steps 1 through 3 of “Normal Playback”. Make sure an IMAGE file is displayed ( Press 4/6 • If you turn the SHUTTLE SEARCH Ring counterclockwise (2) during Auto Playback, images are displayed in descending order.
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion.
NAVI STORE is pressed after a recording is finished (factory preset). Modes other than “MANUAL”: “ and the camcorder always makes a thumbnail image when the recording time is over the selected period of time. Press SELECT/SET Press + or –...
If the end of the tape is reached in step 3, the E-Mail Clip Record-Standby mode will be automatically cancelled. The video clip files made with this camcorder are MPEG4 compliant, however, some MPEG4 files made with other devices may not be played back with this camcorder.
OF F Menu Screen Setting Print Information This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make).
“RETURN” and press SELECT/SET Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation.
Drive Mode), the flash fires only during the first one. Although images shot with a flash tend to look whiter than they actually are, to compensate for this the camcorder automatically darkens the picture when using the flash. When shooting a subject at a distance where the flash light cannot reach (over approx.
Self-Timer (GR-DX300/DX100 only) Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture. Set the Power Switch to “ down the Lock Button located on the switch.
• “DIS” in the MANUAL Menu ( • Video Flash ( pg. 25). During Night-Scope, it may be difficult to bring the camcorder into focus. To prevent this, use of manual focus and/or a tripod is recommended. Programme AE With Special Effects Set the Power Switch to “...
Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording. Set the VIDEO/MEMORY Switch then set the Power Switch down the Lock Button located on the switch.
13). If zoomed-in in the auto focus mode, the position (“ ” or camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when “TELE MACRO” ( “BEEP” on pg. 34. is pressed.
Power Switch to “ ”. If FOCUS is pressed once, the camcorder will enter the focus adjustment mode again. NOTES: Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you...
If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour/tint reproduction. Set the Power Switch to “...
For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( Set the Power Switch to “ down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.
• When shooting subjects with excessive backlighting. • When shooting scenes with movement in various directions. • When shooting scenes with low-contrast backgrounds. Switch off this mode when recording with the camcorder on a tripod. The “ ” indicator blinks or goes out if the Stabiliser cannot be used.
If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: If a tape is in the camcorder, the demonstration cannot be turned on. “DEMO MODE” remains “ON” even if the camcorder power is turned off.
TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. CLOCK ADJ. Allows you to set the current date and time ( QUAL I –...
[ ] = Factory-preset USING MENUS FOR DETAILED ADJUSTMENT NOTES: • The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.
Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. NOTES: As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.
To allow you to add creative effects to the playback . The transmitted image. To start playback, press PLAY (4) Point the remote control at the camcorder’s remote sensor and press EFFECT EFFECT Select Menu appears. Move the highlight bar to the desired effect by pressing EFFECT and after 2 seconds the menu disappears.
Make sure you only edit recorded areas. If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume. If you change from 12-bit to 16-bit in mid-recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began.
GRUNDIG PHILIPS HITACHI GOLDSTAR Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. NOTES: If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.
To PAUSE IN * Connect when the S-Video connection is not used. ** When connecting cables, open this cover. SELECT SCENES Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/OFF on the remote control.
Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.
When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depend- ing on the type of DV connector (4 or 6 pins) on the The system may not work properly depending on the PC or capture board you are using.
Before consulting your JVC dealer, please check the following to see it you can correct the problem yourself. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait...
• When the LCD monitor's fluorescent light reaches the end of its service life, images on the LCD monitor become dark. Consult your nearest JVC dealer. ¥ Adjust the brightness and angle of the LCD monitor pg. 42, 43).
If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. Do not eject the cassette. This will cause damage to the tape. An error indication (E03 or E04) appears.
(during recording, playback, deletion, initialisation, etc.) ..never unload the memory card and never turn off the camcorder. 3. Store memory cards ..away from heaters or other heat sources..out of direct sunlight.
20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions. If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time.
Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.
Camcorder General Power supply : DC 11.0 V DC 7.2 V Power consumption LCD monitor off, viewfinder on : Approx. 3.4 W LCD monitor on, viewfinder off : Approx. 4.6 W Dimensions (W x H x D) : 55 mm x 102 mm x 96 mm...
During Tape Recording Only SOUND b i t 15 : 55 During Memory Card Recording Only 1024 During Both Tape And Memory Card Recording 0 x W BR I GHT INDEX LCD Monitor/Viewfinder Indications 6 7 8 1h50m % ^ & * ( PHOTO 25 .
• 5S/Anim.: Displays the 5 second recording mode or Animation recording mode (GR-DX300/DX100 only) ... Displays the sound mode for approx. 5 seconds after turning on the camcorder ... Displays the Time Code ... Appears when Digital Image Stabiliser (“DIS”) is engaged ...
Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. E03 or E04 UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE The error indications (E03 or E04) show what type of malfunction has occured.