Remote Controller - Onkyo T-4555 Instruction Manual

Remote Controller

Remote Controller
1
2
3
4
5
6
7
8
A
STANDBY/ON button (16)
Sets the T-4555 to On or Standby.
B
Number buttons (17, 20, 24, 31)
Used to select radio presets by number, and to enter
AM/FM station frequencies and Satellite Radio
channel numbers in Direct Tuning mode.
9
C
DIRECT TUNING button (17, 20, 24)
J
Selects the Direct Tuning mode. With AM and FM,
you can select a station directly by entering its fre-
quency. With Satellite Radio, you can select a sta-
K
tion directly by entering its channel number.
D
RETURN button
Returns to the previous display.
L
E
Arrow [ ]/[ ]/[ ]/[ ] buttons (19–28, 31)
With AM and FM, the Up and Down [ ]/[ ] but-
tons are used for tuning. With Satellite Radio, the
Up and Down [ ]/[ ] buttons are used to select
channels.
The Left and Right [ ]/[ ] buttons are used to
M
select category.
F
N
PRESET [+]/[–] buttons (30)
Used to select radio presets.
G
AUTO SCAN button (29, 30)
Starts the Auto Scan function, which selects and
outputs each radio preset in turn for 5 seconds.
H
BAND button (16, 19)
Used to select radio bands, AM, FM, and so on.
I
DISPLAY button (21, 25, 29)
Used to view various information on the display.
J
DIMMER button (7)
Adjusts the display brightness.
K
ENT and ENTER buttons (19–28, 31)
Used to confirm various functions and settings. Also
used to select secondary multicast channels with
HD Radio stations.
L
SETUP button (19, 21, 23, 25–27, 31)
Selects Setup mode.
M
TUNING/CH [ ]/[ ] buttons (16)
With AM and FM, these buttons are used for tuning.
With Satellite Radio, they're used to select stations.
N
TUNING MODE button (16, 20, 24)
With AM and FM, this button selects the Auto or
Manual tuning mode. With Satellite Radio, it selects
the search modes.
9