General Information - MULTIQUIP Mikasa MTR-40F Operation And Parts Manual

MTR-40F — GENERAL INFORMATION
Definition of Tamping Rammer
The Mikasa MTR-40F Tamping Rammer is a powerful
compacting tool capable of applying a tremendous force in
consecutive impacts to a soil surface. Its applications include
soil compacting for backfilling for gas pipelines, water pipelines
and cable installation work.
The impact force of the MTR-40F levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MTR-
40F tamping rammer develops a powerful compacting force at
the foot of the rammer. To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MTR-40F is equipped with a Robin air cooled, four
cycle gasoline engine. Transmission of the power takes place by
increasing the engine speed to engage the centrifugal clutch.
Rammer Spring Cylinder and Crankcase Bearings
The Mikasa MTR-40F uses zerk grease fittings to lubricate the
spring cylinder and crankcase bearings. Lubricate these grease
fittings as referenced in the maintenance section of this manual.
Controls
Before starting the MTR-40F Tamping Rammer identify and
understand the function of the controls, see Figure 1 on page 13.
MTR-40F— PARTS & OPERATION MANUAL — REV. #0 (01/21/04) — PAGE 11