General Information; Tamping Rammer - MULTIQUIP Mikasa Series Operation Manual

Definition of Tamping Rammer
The Mikasa MTR-80L tamping rammer is a powerful compacting
tool capable of applying a tremendous force in consecutive
impacts to a soil surface. Its applications include soil compacting
for road, embankments and reservoirs as well as backfilling for
gas pipelines, water pipelines and cable installation work.
Narrow
accessories are available from
MQ.
The impact force of the MTR-80L levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MTR-
60L tamping rammer develops a powerful compacting force at
the foot of the rammer. To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MTR-80L Tamping Rammer is equipped with an
Robin air cooled, four cycle gasoline engine. Transmission of
the power takes place by increasing the engine speed to engage
the centrifugal clutch.
Rammer Gearbox and Spring Cylinder
The Mikasa MTR-80L uses an grease lubrication system. Always
apply grease to all grease fittings every 8 hours of operation.
(Shell Darina EP2 or Equivalent).
Controls
Before starting the MTR-80L Tamping Rammer, identify and
understand the function of the controls, see Figure 1 on page 11.
NOTE
extension shoe
MTR-80L — OPERATION MANUAL — REV. #9 (10/29/20) — PAGE 7

GENERAL INFORMATION