MULTIQUIP MTX60HD Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Vibratory rammers & tampers
  5. MTX60HD
  6. Operation and parts manual

MULTIQUIP MTX60HD Operation And Parts Manual

Tamping rammer
Hide thumbs Also See for MTX60HD:
Table of Contents

Advertisement

Quick Links

OPERATION AND PARTS MANUAL
SERIES
MODEL MTX60HD
TAMPING RAMMER
(HONDA GX100UKRBF GASOLINE ENGINE)
Revision #3 (10/26/18)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading

Related Manuals for MULTIQUIP MTX60HD

Summary of Contents for MULTIQUIP MTX60HD

  • Page 1 OPERATION AND PARTS MANUAL SERIES MODEL MTX60HD TAMPING RAMMER (HONDA GX100UKRBF GASOLINE ENGINE) Revision #3 (10/26/18) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

  • Page 2: Proposition 65 Warning

    PROPOSITION 65 WARNING PAGE 2 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 3 NOTES MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 3...

  • Page 4: Table Of Contents

    Guide Cylinder Assembly ......... 30-31 without notice. Foot Assembly ..........32-33 Fuel Tank And Handle Assembly ...... 34-35 Combination Lever Assembly ......36-37 Tools ..............38-39 PAGE 4 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 5: Parts Ordering Procedures

    NOTICE All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. WE ACCEPT ALL MAJOR CREDIT CARDS! MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 5...

  • Page 6: Safety Information

    COULD result in DEATH or SERIOUS INJURY. CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 6 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 7 „ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 7...
  • Page 8 Fire or explosion could result if operating in speed ranges above the from fuel vapors or if fuel is spilled on a maximum allowable. hot engine. PAGE 8 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 9 „ DO NOT use food or plastic containers to dispose of hazardous waste. „ DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 9...

  • Page 10: Specifications

    Engine Oil Capacity 0.3 qt. (0.28 liters) Fuel Unleaded gasoline Lubricant for Engine Automobile Oil; Class SE or higher Starting System Recoil Starter Spark Plug Type NGK CR5HSB PAGE 10 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 11: Noise And Vibration Emissions

    Environment by equipment for use outdoors. Products are tested for hand/arm vibration (HAV) level in accordance with European Directives 2002/44/EC and EN500-4 and ISO 5349-1:2001, ISO 5349-2:2001. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 11...

  • Page 12: General Information

    3. Do not move the rammer with the lifting handle Before starting the MTX60HD Tamping Rammer identify and the front rollers more than 16 feet (5 meters). and understand the function of the controls. PAGE 12 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 13: Components

    NOT attempt to start the engine until the fuel residue has been completely wiped up, and the 7. Bellows — Reservoir for oil bath. area surrounding the engine is dry. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 13...

  • Page 14: Basic Engine

    Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear. PAGE 14 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 15: Inspection

    3. Replace any missing or damaged Safety Operation TANK decals. 4. Adjust height of handle. Adjust handle by loosening nuts and moving handle to suit operation. Retighten nuts. Figure 4. Fuel Tank MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 15...

  • Page 16: Operation

    Figure 7. Purge Bulb NOTICE Pumping the purge bulb removes air from the fuel system. It does not pump fuel into the carburetor. PAGE 16 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 17 3. To stop the tamping action, move throttle lever quickly from START to IDLE position (Figure 6). MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 17...

  • Page 18: Maintenance

    „ Remove the oil drain plug on foot housing (Figure 14) and drain the oil. Refill with approximately 0.69 qt. (0.65 PAGE 18 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 19: Troubleshooting

    Fuel fi lter/lines clogged? Replace fuel fi lter. Fuel tank cap breather hole clogged? Clean or replace fuel tank cap. Air in fuel line? Bleed fuel line. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 19...
  • Page 20 Check cable connections. Charge or replace Will not start, no power with key "ON". (if Battery disconnected or discharged? applicable) battery Ignition switch/wiring defective? Replace ignition switch. Check wiring. PAGE 20 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 21 Spring Failure? Replace spiral spring. Adjust engine speed to correct Speed of engine improper? operating RPM setting. Soil over-compacted? Shut down machine and test soil. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 21...

  • Page 22: Explanation Of Code In Remarks Column

    “Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. PAGE 22 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)

  • Page 23: Suggested Spare Parts

    1....366900170 ....CUP AND PACKING SET 1....366348550 ....CLUTCH ASSY NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 23...

  • Page 24: Nameplates And Decals

    Bitte nur Benzin elnfullen Usare solo Benzina requirments. Solo para Gasoline MEETS U.S.EPA EVAP STANDARDS USING CERTIFIED COMPONENTS MIKASA SANGYO CO.,LTD. A (DECAL SET) series quick manual PAGE 24 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 25 DECAL, CHOKE OPERATION 920214100 DECAL, E/G FIRE WARNING SERIAL PLATE NO..........1....CONTACT MQ PARTS DEPT. W/ SERIAL NO. 920216780 DECAL, EVAPO MEET 920222240 DECAL, WARNING PROPOSITION 65 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 25...

  • Page 26: Crankcase And Engine Assembly

    54-1 54-2 32-1 32-1 43-2 43-1 54-2 54-1 25-2 25-1 54-2 54-1 PAGE 24 — MTX-60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (12/01/11) PAGE 26 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 27 SECONDARY ELEMENT 36-9# 362030040 GRIP BPLT CP 366345470 INTAKE PIPE 954407681 CYCLONE CLAMP (CY- 1) 45 954407682 CYCLONE CLAMP (CY- 1) 38 366460160 UNDER SEALING FORM MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 27...
  • Page 28 54-1 54-2 32-1 32-1 43-2 43-1 54-2 54-1 25-2 25-1 54-2 54-1 PAGE 24 — MTX-60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (12/01/11) PAGE 28 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 29 CLIP (TCP2-10509B) 368461280 WIRE HARNESS 2067550101 CLAMP COMPL 959021814 SPIRAL TUBE KEP6 / L=200 454010020 CLAMP TC-100 368347270 CRANK GEAR 368010010 FRONT COVER 912210014 ENGINE ASSY., GX100UKRBF MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 29...

  • Page 30: Guide Cylinder Assembly

    GUIDE CYLINDER ASSY. GUIDE CYLINDER ASSY GUIDE CYLINDER ASSY. PAGE 28 — MTX-60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (12/01/11) PAGE 30 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 31 NUT M8 953405270 PLUG 1/4X14 13L 953405260 PACKING 1/4 (CU) 368118970 PROTECTION SLEEVE 366460300 OIL GAUGE ASSY. 953404670 COPPER PACKING 17X25.5X1 050200800 0-RING P-80 050101300 0-RING G-130 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 31...

  • Page 32: Foot Assembly

    FOOT ASSY PAGE 32 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 33 BOLT, SQUARE NECK 12X65 009110035 BOLT, SQUARE NECK 12X95 363343390 HANDLE LIFT 368347460 FOOT COVER 030210250 WASHER, LOCK M10 022711012 NYLON NUT M10 009110036 BOLT, SQUARE NECK 10X55 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 33...

  • Page 34: Fuel Tank And Handle Assembly

    FUEL TANK AND HANDLE ASSY 11-1 11-2 11-3 PAGE 34 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 35 16910Z4ES21 FILTER, IN-LINE FUEL 959328403 FUEL HOSE 5.5X8.5X260 954407720 TUBE, VINYL L180 111% 959028301 RETURN HOSE 3X6X600 112% 954408170 HOSE CLIP 113% 959021814 SPIRAL TUBE 6D-200L MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 35...

  • Page 36: Combination Lever Assembly

    COMBINATION LEVER ASSY BODY PAGE 36 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 37 366010320 STOP SWITCH 956100062 THROTTLE WIRE 11@# 094010051 TAPPING SCREW B1 4X12 12@# 094010052 TAPPING SCREW B1 4X30 13@# 050200150 O-RING, P15 14@# 050200110 O-RING, P11 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 37...

  • Page 38: Tools

    TOOLS TOOLS. PAGE 38 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 38 — MTX-60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #8 (25/07/12)
  • Page 39 983910090 PISTON ROD HOLDER 009110044 SOCKET HEAD BOLT 8X50 (FULL THREAD) CRANK GEAR REMOVER 983910021 CLUTCH PULLER B 983010042 SPRING CYLINDER REMOVER 983910010 PISTON END REMOVER MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 39...

  • Page 40: Cylinder Barrel Assembly

    HONDA GX100UKRBF ENGINE — CYLINDER BARREL ASSY. HONDA GX100UKRBF ENGINE — CYLINDER BARREL ASSY. PAGE 40 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 41 PLATE, STOPPER 15721Z0DV70 TUBE, BREATHER 90014952000 VOLT, FLANGE 6X14 (CT200) 91202KJ9003 OIL SEAL 20X32X6 93500030050A SCREW 3X5 9805655777 PLUG, SPARK (U16FSR-UB) 15171Z0DV00 PIPE, BREATHER 90008ZM7000 BOLT 4X10 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 41...

  • Page 42: Crankcase Cover Assembly

    HONDA GX100UKRBF ENGINE — CRANKCASE COVER ASSY. HONDA GX100UKRBF ENGINE — CRANKCASE COVER ASSY. PAGE 40 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 42 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 43 CLIP, GOVERNOR HOLDER 91202KJ9003 OIL SEAL 20x32x6 9410106800 PLAIN WASHER 6 MM 9425108000 LOCK PIN 9430108200 KNOCK PIN 91001Z0DV01 BEARING, RADIAL BALL 6204 91231891003 OIL SEAL 6x11x4 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 43...

  • Page 44: Crankshaft Assembly

    HONDA GX100UKRBF ENGINE — CRANKSHAFT ASSY. HONDA GX100UKRBF ENGINE — CRANKSHAFT ASSY. 85.3 PAGE 44 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 42 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11)
  • Page 45 HONDA GX100UKRBF ENGINE — CRANKSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 13310Z0DV70 CRANK SHAFT COMP ........1....INCLUDES ITEM W/@ 91001Z0DV01 BEARING, RADIAL BALL MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 45...

  • Page 46: Piston/ Conn. Rod Assembly

    HONDA GX100UKRBF ENGINE — PISTON CONNECTING ROD ASSY. HONDA GX100UKRBF ENGINE — PISTON/ CONN. ROD ASSY. PAGE 44 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 46 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 47 PISTON PIN 13200Z0D000 CONNECTING ROD ASSY.......1....INCLUDES ITEM W/@ 13200Z0D305 CONNECTING ROD ASSY., UNDERSIZE ..1....INCLUDES ITEM W/@ 90001ZM7000 CONNECTING ROD BOLT 90551ZE0000 CLIP, PISTON PIN 13MM MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 47...

  • Page 48: Camshaft Assembly

    HONDA GX100UKRBF ENGINE — CAMSHAFT ASSY. HONDA GX100UKRBF ENGINE — CAMSHAFT ASSY. PAGE 46 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 48 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 49 INLET VALVE 14721Z0D000 EXHAUST VALVE 14751Z0D000 SPRING, VALVE 14771ZM3010 RETAINER, VALVE SPRING 90012333000 SCREW, TAPPET ADJUSTING 90206001000 NUT, TAPPET ADJUSTING 91301ZM0V31 O-RING 6.8X1.9 12209KT7013 SEAL, VALVE STEM MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 49...

  • Page 50: Recoil Starter Assembly

    HONDA GX100UKRBF ENGINE — RECOIL STARTER ASSY. HONDA GX100UKRBF ENGINE — RECOIL STARTER ASSY. PAGE 48 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 50 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 51 SPRING, FRICTION 28442ZH8003 SPRING, RECOIL STARTER 28461ZH8013 STARTER KNOB 28462Z0DV03 ROPE, RECOIL STARTER 28467Z0DV02 PLATE, SIDE 28468Z0DV02 PLATE, SLIDE 90003ZH8003 SET SCREW 957010600800 BOLT, FLANGE 6X8 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 51...

  • Page 52: Fan Cover Assembly

    HONDA GX100UKRBF ENGINE — FAN COVER ASSY. HONDA GX100UKRBF ENGINE — FAN COVER ASSY. PAGE 50 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 52 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 53 HONDA GX100UKRBF ENGINE — FAN COVER ASSY. PART NO. PART NAME QTY. REMARKS 19610Z4ES30ZA FAN COVER CP 90014952000 BOLT, FLANGE 6X14 (CT200) MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 53...

  • Page 54: Carburetor Assembly (S/N T-3423 And Below)

    (S/N T -3423 & BELOW) HONDA GX100UKRBF ENGINE — CARBURETOR ASSY. (S/N T-3362 AND BELOW) PAGE 54 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 52 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11)
  • Page 55 INSULATOR B, CARBURETOR 16214Z0DV01 PACKING B, INSULATOR 16215Z0DV00 PLATE, INSULATOR 16221Z0DV00 PACKING, CARBURETOR 950014500350M HOSE, FUEL 4.5X270 H950024085008 CLAMP, TUBE 950033600110M TUBE, VINYL 11X13X1M 16552896650 COLLAR, LEVER MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 55...

  • Page 56: Carburetor Assembly (S/N T-3424 And Above)

    (S/N T -3424 & ABOVE) HONDA GX100UKRBF ENGINE — CARBURETOR ASSY. (S/N T-3363 AND ABOVE) PAGE 56 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 54 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11)
  • Page 57 JET (#50) ............1....5000-7000 99101Z0D0520 JET (#52) ............1 ....STANDARD 950033600110M TUBE, VINYL 11X13X1M 16017Z4ES32 BODY ASSY., AIRPURGE 16026Z4ES32 COVER, PRIMER PUMP 16032Z4ES32 PUMP, PRIMER 16055Z4ES32 SCREW ASSY. MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 57...

  • Page 58: Air Cleaner Assembly

    HONDA GX100UKRBF ENGINE — AIR CLEANER ASSY. HONDA GX100UKRBF ENGINE — AIR CLEANER ASSY. PAGE 58 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 56 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11)
  • Page 59 HONDA GX100UKRBF ENGINE — AIR CLEANER ASSY. PART NO. PART NAME QTY. REMARKS 17228Z0DV21 PACKING, AIR CLEANER 90042Z4ES30 STUD BOLT 5X95 9405005000 FLANGE NUT 5MM 17410Z4ES31 ELBOW, AIR CLEANER MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 59...

  • Page 60: Muffler Assembly

    HONDA GX100UKRBF ENGINE — MUFFLER ASSY. HONDA GX100UKRBF ENGINE — MUFFLER ASSY. PAGE 60 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) PAGE 58 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11)
  • Page 61 PART NAME QTY. REMARKS 18310Z0DV20 MUFFLER COMP. 18321Z0DV22 MUFFLER PROTECTOR 18381Z0D000 GASKET, MUFFLER 90014952000 BOLT, FLANGE 6X14 (CT200) 90048Z0DV00 STUD BOLT 6X78 90343ZE6000 NUT, SELF-LOCK 6MM MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 61...

  • Page 62: Flywheel Ignition Assembly

    HONDA GX100UKRBF ENGINE — FLYWHEEL IGNITION ASSY. HONDA GX100UKRBF ENGINE — FLYWHEEL IGNITION ASSY. PAGE 60 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 62 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 63 GROMMET, CORD 131110Z0D003 FLYWHEEL COMP 90022888010 FLANGE BOLT 6X20 9405012000 FLANGE NUT M12 28451Z0DV03 STARTER PULLEY 30500Z0DV02 IGNITION COIL ASSY ........1....INCLUDES ITEMS W/@ 30700Z0DV01 TERMINAL ASSY MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 63...

  • Page 64: Control Assembly

    HONDA GX100UKRBF ENGINE — CONTROL ASSY. HONDA GX100UKRBF ENGINE — CONTROL ASSY. PAGE 62 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 64 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 65 BOLT, GOVERNOR ARM 90605230000 CIR CLIP 92301050220A BOLT 5X20 0043504060 SCREW 4X6 9405006000 FLANGE NUT 6MM 16550Z0DV01 GOVERNOR ARM 16500Z4ES30 CONTROL ASSY ..........1....INCLUDES ITEMS W/@ 9400105000 NUT M5 MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 65...

  • Page 66: Labels Assembly

    HONDA GX100UKRBF ENGINE — LABELS ASSY. HONDA GX100UKRBF ENGINE — LABELS ASSY. PAGE 64 — MTX70HD — OPERATION AND PARTS MANUAL — REV. #14 (12/01/11) PAGE 66 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 67 HONDA GX100UKRBF ENGINE — LABELS ASSY. PART NO. PART NAME QTY. REMARKS 87521Z0DV02 LABEL, TRADE MARK 87528Z0D000 MARK, CHOKE 87601Z4ES30 MARK, TYPE (KRBF) 89216130690 WRENCH, SPARK PLUG MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 67...

  • Page 68: Terms And Conditions Of Sale - Parts

    Multiquip’s designated receiving point. PAGE 68 — MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18)
  • Page 69 NOTES MTX60HD RAMMER • OPERATION AND PARTS MANUAL — REV. #3 (10/26/18) — PAGE 69...
  • Page 70 © COPYRIGHT 2018, MULTIQUIP INC. Multiquip Inc , the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual is also suitable for:

Mikasa series

Table of Contents