Combinations Of Guide Bars And Saw Chains; Stihl Msa 220.0 T, Msa 220.0 Tc - Stihl MSA 220.0 T Instruction Manual

English

28 Combinations of Guide Bars and Saw Chains

28.1 STIHL MSA 220.0 T, MSA 220.0 TC

Pitch Drive link
gauge/Groove
width
0.043 in.
3/8" P
(1.1 mm)
0.050 in.
3/8" P
(1.3 mm)
1)
When using a guide bar greater than 12" (30 cm), use of
a STIHL AR series battery or AP battery bag with connecting
cord is not authorized.
The guide bar and chain combinations listed above meet the
25° computed kickback angle requirement of UL 62841-4-1
when used on this model chain saw with the matching chain
sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 25°
computed kickback angle requirement of UL 62841-4-1
when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback
STIHL guide bars. The listed chains are green-labeled low
kickback STIHL chains
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.
64
Length Guide bar
12 in.
(30 cm)
14 in. Rollomatic E /
1)
(35 cm) Light 04
16 in.
1)
(40 cm)
12 in.
(30 cm) Rollomatic E /
Light 04
14 in.
1)
(35 cm)
Rollomatic E Light /
16 in. Light P04
1)
(40 cm)
28 Combinations of Guide Bars and Saw Chains
Number of teeth Drive link
of sprocket nose count
44
9 50
55
44
9 50
55
Saw chain
61 PMM3 (Type
3610)
61 PS3 Pro (Type
3699)
63 PM3 (Type 3636)
63 PS3 (Type 3616)
0458-007-8601-A