System Firmware Upgrade - Toshiba STOR.E TV+ User Manual

System Firmware Upgrade

The Firmware is the program that internally controls STOR.E TV+ (media
files playback, user interface, configuration). You may need to upgrade
your firmware to improve your experience with new features or to fix some
issues.
Make sure that the power adaptor of STOR.E TV+ is always connected and
NOTE
do not remove the USB device during the firmware upgrade. A power cut
or removing the USB device during the update process can corrupt the
system and your product may not work any more.
The USB device is the most convenient solution to upgrade your firmware.
To update the firmware:
1. Go to http://computers.toshiba.eu/options-support and go in the
"Manuals and Drivers" section.
2. Click "Download Firmware" then select Product type = "Options", Family
= "Drive Devices", Product series = "HDDs & HDD adapters", Model =
"STOR.E TV+".
3. Download the latest firmware and copy the install.image file to a USB
device. The firmware must be located at the root level of the USB
device.
4. Connect the USB device to STOR.E TV+ USB port.
5. Press SETUP button on the remote control, select System Update
option in System menu. Press OK to confirm, a tip box will display.
Press
are prompted to perform the firmware upgrade.
6. Please wait until the update is complete. Once the update process is
completed, STOR.E TV+ will restart and the new firmware is
automatically loaded.
If the system could not find the update file, the screen will display a
NOTE
forbidden symbol
menu. At this time, you need to copy update file into USB device and try
again.
User's Manual
/ to select Update, then press OK to start the upgrade. You
on the top left corner of screen and return to the last
STOR.E TV+
EN-45