Network Connection And Setup - Toshiba STOR.E TV+ User Manual

Network connection and setup

This device can play the files stored on the network directly through a
router hub. Connect the LAN cable according to the following illustration.
There is a strong network connection when the LAN active indicator glows
and the Link indicator blinks.
(Sample Illustration) Network connection
In order to connect to and setup the network, follow the above connection
illustration and the steps as described below:
1. Connect one LAN cable to your computer and another LAN cable to
STOR.E TV+.
2. Connect STOR.E TV+ to TV via AV cable or HDMI cable.
3. Press the SETUP button on the remote control or select Setup menu in
the initialization interface.
4. Select Network option in the setup window and press OK to confirm.
5. Setup IP automatically or manually. Refer to
page 33
6. Press SETUP button again to exit after setup.
Before accessing the computer through network via STOR.E TV+, the
NOTE
media files must be shared on the network. Please refer to
file sharing on the computer" on page 20
setup of media file sharing on the computer.
User's Manual
LAN cable
LAN port
LAN cable
for more information about the methods of setting up network.
LAN port
HDMI cable
"Network Setup" on
for more information about how to
STOR.E TV+
AC adaptor cable
HDMI port
"Setup of media
EN-17