Toshiba STOR.E TV+ User Manual page 32

STOR.E TV+
Audio Setup
■
Night Mode: On, Off and Comfort modes.
In comfort mode, it restricted volume automatically.
■
Digital Output:
HDMI LPCM: Digital audio signal is decoded by the product outputs
through HDMI 2.0 channel.
HDMI LPCM MULTI CH: Digital audio signal is decoded by the product
outputs through HDMI 5.1 channel.
HDMI RAW: The raw digital signal of multimedia data is directly
outputted through HDMI. When this function is enabled, the remote
control can not be used to adjust the volume.
SPDIF LPCM: Digital audio signal is decoded by the product outputs
through coaxial.
SPDIF RAW: The raw digital signal of multimedia data is directly
outputted through coaxial, When this function is enabled, the remote
control can not be used to adjust the volume.
If selecting HDMI LPCM/RAW, there is no signal output through coaxial. If
NOTE
selecting SPDIF LPCM/ RAW, there is no signal output through HDMI.
Photo Setup
■
Slide Show Timing: Sets time interval of photo change while slide
show is playing. Off or 2sec/5sec/10sec/30sec /1minutes/2 minutes.
■
Transition Effect: Selects among eight different picture transformation
effects or turns the Transition Effect function off.
■
Ken Burns: Turns the Ken Burns function on or off. When on, the zoom
function can be used when photos are being displayed.
■
Background Music: Choose the position for the background music or
turn the Background Music function off. Music must be in the same
folder or playlist.
Network Setup
Wired LAN Setup and Wireless Setup:
■
Wired Lan Setup: Selects automatic or manual mode to obtain the IP
address.
■
Wireless Setup: Selects wireless connection mode Infrastructure (AP)
or Peer to Peer (Ad Hoc).
■
PPPoE Setup: If your device is connected to a network via DSL and
PPPoE, input the net user ID and password provided by your network
service operator to connect the network.
EN-32 User's Manual