Table of Contents
Advertisement
PPPoE Setup
PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by many
ADSL Internet Service Providers. If your ISP uses PPPoE, but has given
you a router, you may need a PPPoE client on your Linux box. DHCP may
work fine.
The device is ideal for users with a DSL modem whose Internet service
provider uses PPPoE. Before you use this function, ensure it is really
necessary.
If the device is connected to a network via DSL and PPPoE, the DSL
service provider will provide a username and password for you to log in.
After passing security authentication by the telecom operator, the user can
obtain the IP address and then the product is connected to internet.
The steps for PPPoE setup are as follows:
1. Use a telephone line to the modem which supports PPPoE, then
connect the device to the modem via the LAN port.
2. Click Setup -> Network -> PPPoE Setup in the Network. Enter the net
user ID and password provided by the telecom operators. Press OK to
confirm.
(Sample Image) PPPoE Setup
3. After a few minutes the user will obtain an IP address configured by
ethernet. This indicates the network connection is successful.
Accessing the network
After network setup is complete, the network can be accessed. The device
can play multimedia files in the shared content. When videos are played, a
network connection speed indicator will be displayed on the screen. A
higher speed indicates that the network is more stable and the quality of the
video playback will be better.
User's Manual
STOR.E TV+
EN-41
Advertisement
Table of Contents
