Table of Contents
Advertisement
3. Select HI-FREQ or LO-FREQ with the arrow keys.
4. Use the [+]/[-] key to set frequency.
5. Press [ ] to select SUPPLY VOLTAGE.
6. Set supply voltage with [+]/[-] key.
7. Press [ ] to select IMPEDANCE.
8. Set impedance with [+]/[-] key. (Not required; system will function properly without set-
ting.)
9. For 2nd transducer, set it as appropriate.
10.Press the [MENU] key to return to the SYSTEM menu.
15
Advertisement
Table of Contents
