Scrolling Through The List Of Frequencies - Garmin GNS 530 Pilot's Manual & Reference

SECTION 3
NAV PAGES

Scrolling through the list of frequencies:

1) Activate the cursor, if not already active, by
pressing the small right knob.
Turn the large right knob to move the cursor
2)
through the list of frequencies. If there are
more frequencies in the list that can be
displayed on the screen, a scroll bar along the
right-hand side of the screen (Figure 3-44)
indicates which part of the list is currently being
displayed.
Figure 3-44 Scroll Bar
3) To place a frequency in the standby field of the
COM or VLOC Window, highlight the desired
frequency and press the ENT Key.
Some listed frequencies may include designations for
limited usage, as follows:
• 'TX' - Transmit only
• 'RX' - Receive only
• 'PT' - Part time frequency
3-22
the frequency is preceded by an 'Info?' designation.
Scroll Bar
GNS 530(A) Pilot's Guide and Reference
If a listed frequency has sector or altitude restrictions,
Viewing usage restrictions for a frequency:
Turn the large right knob to place the cursor
1)
on the 'Info?' designation directly in front of
the desired frequency (Figure 3-45).
Figure 3-45 'Info' Highlighted
2) Press the ENT Key to display the restriction
information (Figure 3-46).
Figure 3-46 Restriction Information Page
3) To return to the NAV/COM Page, press the ENT
Key.
190-00181-00 Rev. H