Setup Page: COM Configuration
Setting the COM channel spacing:
1)
Select 'COM Configuration' from the Setup
Page, using the steps described at the beginning
of this section.
2)
The flashing cursor highlights the channel
spacing field (Figure 10-44). Turn the small
right knob to select the desired channel
spacing: 8.33 kHz or 25.0 kHz. Press the ENT
Key when finished.
Figure 10-44 Channel Spacing Window
190-00181-00 Rev. H
Restoring Factory Settings
When making changes to any Setup Page option, a
'Restore Defaults?' menu selection allows the pilot to
restore the original factory settings (for the selected option
only). For example, with the CDI/Alarms Page displayed,
the 'Restore Defaults?' option restores all airspace alarms
and CDI settings to the original factory values.
Restoring a Setup Page option to the origi-
nal factory settings:
1)
2)
3)
GNS 530(A) Pilot's Guide and Reference
Select the desired menu option from the
Setup Page, using the steps described at the
beginning of this section.
Press the MENU Key to display the CDI/Alarms
Page Menu (Figure 10-45).
Figure 10-45 CDI/Alarms Page Menu
With 'Restore Defaults?' highlighted, press the
ENT Key.
SECTION 10
AUX PAGES
10-29