Siemens SIMATIC ET 200SP Manual page 14

Product overview
2.2 Functions
● Station extension via ET-Connection
● The BusAdapter provides the connection system for PROFINET IO. The following
versions are available for the IM 155-6 PN HF interface module:
* As of product version 3 of the interface module
The interface module supports additional functions:
● Identification data I&M 0 to I&M 4
● Device replacement without topological configuration
● Value status (of I/O modules)
● Oversampling
● PROFIenergy
● Use of fail-safe modules
● Multi Hot Swap (removal/insertion of multiple I/O modules during operation)
● Reset to factory settings via RESET button
● Configuration control (option handling)
Note
The use of the IM155-6 PN HF interface module as a docking unit (function: IO device
changing in operation) in a docking system is not supported.
14
BusAdapter
For standard RJ45 connector:
BA 2×RJ45
For direct connection of the bus cable:
BA 2×FC
For fiber-optic cable (FOC): BA
2xSCRJ
For transition from fiber-optic cable
POF/PCF to the RJ45 bus connection:
BA SCRJ/RJ45
For transition from fiber-optic cable
POF/PCF to the direct connection of
the bus cable: BA SCRJ/FC
Up to firmware As of firmware 2.2
2.1
X
X
--
--
--
IM 155-6 PN HF interface module (6ES7155-6AU00-0CN0)
Manual, 03/2015, A5E03915895-AF
As of firmware
3.1
X X
X X
X * X
-- X
-- X