between dots on the course deviation
indicator.
Navigating with the Course Pointer
Before you can navigate with the
course pointer, you must change the
pointer setting to Course (CDI)
(page
34).
1. Begin navigation to a destination
(page
16).
2. Select Compass.
3. Use the course pointer to navigate
to the destination
Elevation Plot
Elevation plotting is available on the
eTrex 30.
By default, the elevation plot displays
the elevation for an elapsed time. To
customize the elevation plot, see
page
34.
Select Elevation Plot.
eTrex Owner's Manual
(page
18).
Changing the Plot Type
You can change the elevation plot to
display pressure and elevation over
time or distance.
1. Select Elevation Plot > menu >
Change Plot Type.
2. Select an option.
Viewing Details about a Point
on the Plot
Select an individual point on the
plot.
Details about the point appear at the
top of the plot.
Resetting the Elevation Plot
Select Elevation Plot > menu >
Reset > Clear Current Track >
Yes.
Navigation
19