Product Loading And Unloading - Electrolux SkyLine ChillS 6GN 1/1 User Manual

• Any anomalous situations are signalled on the control panel display.
• During maintenance several risks remain, as these could not be eliminated, and must be neutralised by adopting specific
measures and precautions.
• Do not carry out any checking, cleaning, repair or maintenance operations on moving parts. Workers must be informed of this
prohibition by means of clearly visible signs.
• To guarantee machine efficiency and correct operation, periodical maintenance must be carried out according to the instructions
given in this manual.
• Make sure to periodically check correct operation of all the safety devices and the insulation of electrical cables, which must be
replaced if damaged.
• Extraordinary machine maintenance operations must only be carried out by specialised personnel provided with all the
appropriate personal protection equipment, tools, utensils and ancillary means.
• Never operate the machine, removing, modifying or tampering with the guards, protection or safety devices.
Reasonably foreseeable improper use
Improper use is any use different from that specified in this manual. During machine operation, other types of work or activities
deemed improper and that in general can involve risks for the safety of operators and damage to the appliance are not allowed.
Reasonably foreseeable improper use includes:
• lack of machine maintenance, cleaning and periodical checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators, specialised personnel and maintenance personnel;
• failure to use suitable accessories (e.g. use of unsuitable equipment or ladders);
• keeping combustible or flammable materials, or in any case materials not compatible with or pertinent to the work, near the
machine;
• wrong machine installation;
• placing in the machine any objects or things not compatible with its use, or that can damage the machine, cause injury or pollute
the environment;
• climbing on the machine;
• non-compliance with the requirements for correct machine use;
• other actions that give rise to risks not eliminable by the Manufacturer.
The previously described actions are prohibited!
Residual risks
• The machine has several risks that were not completely eliminated from a design standpoint or with the installation of adequate
protection devices. Nevertheless, through this manual the Manufacturer has taken steps to inform operators of such risks,
carefully indicating the personal protection equipment to be used by them. Sufficient spaces are provided for during the machine
installation stages in order to limit these risks.
To preserve these conditions, the areas around the machine must always be:
– kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
– clean and dry;
– well lit.
For the Customer's complete information, the residual risks remaining on the machine are indicated below: such actions are
deemed improper and therefore strictly forbidden.
Residual risk
Slipping or falling
Burns/abrasions (e.g. heating elements, cold
pan, cooling circuit plates and pipes)
Electrocution
Falling from above
Tipping of loads
Chemical (refrigerant gas)
Harm to eyesight and skin
Normal machine use
• If the appliance contains a UV emitter, do NOT stare at the light source.
• In case of a significant anomaly (e.g. short circuits, wires coming out of the terminal block, motor breakdowns, worn electrical
cable sheathing, etc.) the operator must immediately deactivate the machine.
A.5

Product loading and unloading

• Cover or wrap food before placing it in the appliance.
• Use kitchen gloves when loading and removing food.
• Regarding the maximum load for each appliance and each shelf, respect that given in the table below:
6
Description of hazardous situation
The operator can slip due to water or dirt on the floor
The operator deliberately or unintentionally touches some components
inside the machine without using protective gloves
Contact with live parts during maintenance operations carried out with the
electrical panel powered
The operator intervenes on the machine using unsuitable systems to
access the upper part (e.g. rung ladders, or climbs on it)
When handling the machine or the packing containing it, using unsuitable
lifting systems or accessories or with the load unbalanced
Inhalation of refrigerant gas. Therefore always refer to the appliance
labels
Exposure to UV rays for appliances with germicidal lamp, in case of door
interlock fault.