Table of Contents
Advertisement
5. At the end of the cycle, if available, the display shows the
consumptions as a recap message.
6. The appliance keeps holding.
Chocolate
It allows to get perfectly melted or crystalized chocolate.
To start the cycle proceed as follow:
1. Select Chocolate cycle;
2. Select the required preset;
It is possible to choose between several factory presets
performed with different cycles:
• Crystallisation bars and ganaches;
• Crystallisation shells;
• Freeze;
• Holding;
• Melting;
AUTOMATIC
Chocolate
Crystallisation bars and ganaches
Crystallisation shells
Freeze
Holding
Melting
AUTOMATIC
Meat balls
Cycle type
Chill
Control
3. If needed set the parameters;
Probe
It is possible to save and store the performed presets from
the lower drawer;
Norms
5:30
4. Touch Start button;
5. When cavity preparation is finished, insert the food in the
cavity, close the door and the cycle starts;
6. At the end of the cycle, if available, the display shows the
consumptions as a recap message;
7. The appliance keeps holding.
E.10 Programs mode
The "Programs Mode" allows to recall program recipes already
stored or downloaded from cloud and/or create and store new
ones.
Freeze
Timer
Save
preset
-10°C
-20°C
How to set a program cycle
1. Select Programs mode. The display shows all stored
programs.
MANUAL
USER
Manual
Automatic
Programs
1
Chill
-
20
c
°
Skyhub
Hygiene
Settings
?
Help
Agenda
USB
SkyDuo
Transfer
h:m
To change the programs displaying from a list to a grid
open the lower drawer and select grid visualization:
PROGRAMS
All programs
Cloud Program
Visualization:
Grid
List
Show:
Categories
Programs
Source:
Local
All
Cloud
AUTOMATIC
USER
Type:
Normal
Multitimer
All
Pizza,
Chill
Parameter 1
Time
Probe
Manage MT
Selective
delete
Presets
Parameter 2
A
B
C
6:30
100%
300°C
120°C
PM
Parameter 3
A
B
C
D
When displaying the programs, the appliance gives you a
01 20
:
general information about the type of program and its
source:
:00
01:20 h:m
Program downloaded from cloud
(available only with connectivity devices,
installed by specialised personnel)
PM
MultiTimer program
Program with delay start
2. Touch the required program;
The appliance loads the program in Manual mode ready to
be launched.
NOTE!
To search a program touch icon
name on the appearing keypad. The display will
show the programs most similar to the one you
typed.
How to create and save a program
• Select a cycle in Manual mode and if necessary set the
parameters (see chapter E.8 Manual mode).
• Open the lower drawer and touch "Save program" icon.
PROGRAMS
All programs
Cloud Program
Local Program
Pizza
Pizza (local)
Multitimer Program
Delayed Program
Cloud
delayed Programm
Cloud
MultiTimer Programm
PROGRAMS
All programs
Cloud
Local
Pizza
Program
Program
Delayed
Pizza (local)
MultiTimer
Program
Program
Cloud
Cloud MultiTimer
delayed Program
Program
and digit the
27
Advertisement
Table of Contents
