Electrolux SkyLine ChillS 6GN 1/1 User Manual page 34

Blast chillers/freezers
Table of Contents

Advertisement

SETTINGS
Sounds
Touch panel sound
Volume
End-cycle sound
Sound 01
Sound 02
Display
This setting allows to adjust the brightness of display.
SETTINGS
Display
Brightness
a
Sleep timeout
00 3 : 0
1 2 3
4 5 6
7 8
Touch screen calibration
This setting allows to set the calibration of the screen.
1. Touch the screen as close as possible to the centre of the
red cross;
2. Repeat until the cross turns green;
3. Touch and hold to exit;
1
Touch the screen as close as
possible to the center of the red
cross. Repeat until the cross turns
green. Touch and hold to exit.
3
50
50
Touch screen test
• Touch the points required to test the screen.
• Hold down to exit.
Touch to test. Hold down to exit.
Food safety (HACCP)
34
3
50%
S
9
0
m:s
b
2
4
-1
-1
-1
-1
Norms
This setting allows to activate/deactivate (
section:
• Custom
• UK
• NF
• NSF
SETTINGS
Guidelines
Guidelines Section
Guidelines predictive check
Default guidelines
Custom
UK
NF
NSF
Enabling the function "Guidelines predictive check" it is
possible to have a prediction of the normative check results
already during the first part of the cycle, thanks to the time end
estimation algorithm.
UK-NF-NSF parameters are not modifiable. It is possible to
change only Custom parameters.
SETTINGS
Select Custom and open the drop-down list to change the
following parameters:
Guidelines
Guidelines Section
Guidelines predictive check
Default guidelines
Custom
Final set temperature for
chilling cycle
Final set time for chilling
cycle
Final set temperature for
freezing cycle
Final set time for freezing
cycle
Starting temperature for
chill/freezing cycle
• Final set temperature for chilling cycle
UK
• Final set time for chilling cycle
NF
• Final set temperature for freezing cycle
• Final set time for freezing cycle
• Starting temperature for chill/freezing cycle
User Password
• This setting allows to set a password to access into specific
environments, features and options to prevent setting
changes.
SETTING
Settings
Accessories
Manual
Automatic
Programs
MultiTimer
SkyHub
Hygiene
Chiller Identity Card
ID
Startup page
Service maintenance
If the password is forgotten, contact the Service.
/
) Norms
USER
10°C
110
-18°C
270
63°C
SETTINGS
All settings
Manual
Automatic
Programs
MultiTimer
SkyHub
Cleaning
Green Spirit
Accessories
ID
Identity Card
ser Pass ord
Service

Advertisement

Table of Contents
loading

Table of Contents