Table of Contents
Advertisement
3. The display shows the countdown of the remaining time to
the cycle start.
05:30
09:30
4. If you want the appliance to perform the preparation phase
for the delayed cycle, see chapter E.13 Settings mode
(Manual ⇨ General, ⇨ ) and enable the feature "Delayed
start precooling" (
/
In this case the appliance asks to perform the preparation
phase (precooling/preheating) for the cycle at the set time.
MANUAL
1
Preparation phase request
Do you want to perform the preparation
05:30
Touch the
to execute the preparation phase or touch
to disable it.
The appliance starts the countdown. The display shows the
delay start icon, the remaining time and the set starting time.
It is still possible to skip the delay and start immediately the
cycle. In this case the appliance starts the preparation phase.
Skip Delay start
E.8
Manual mode
E.8.1
Cycle setting
1. Press the ON/OFF button to switch the appliance on.
The display illuminates and shows, by default the main
screen of the MANUAL mode.
Delayed start
).
Delayed start
phase for this cycle?
09:30 AM
2. Select a cycle (for example Chill cycle).
MANUAL
1
01:30
3. If the default parameters are suitable for food, touch the
button
to start the cycle.
If it is necessary to stop the cycle, hold down the button
.
4. Precooling (or preheating) starts.
NOTE!
This phase can be enabled or disabled in
chapter E.13 Settings mode (Manual ⇨ Gen-
eral, ⇨ Precooling).
Precooling
0°C
Precooling and preheating functions prepare the cavity
temperature before the beginning of the selected cycle.
Skip Precooling/Preheating
Skip the preparation and go immediately to the main cycle.
Chill
0
°C
Soft / Hard
:00
7
°C
15
Advertisement
Table of Contents
