Sending Workout Data To Your Computer; Using The Heart Rate Monitor - Garmin FR70 Owner's Manual

Getting Started
Sending Workout Data to
Your Computer
nOTE: You must download
software (page
necessary USB drivers are
installed before connecting the
USB ANT Stick to your computer.
1. Plug the USB ANT Stick into
an available USB port on your
computer.
2. Bring your FR70 within range
(5 m) of your computer.
nOTE: If Power Save Transfer is
activated, your FR70 must be in
regular time mode to transfer data
to your computer. See
3. Follow the on-screen instructions.
10
9) so that the
page 28.
Using the Heart Rate
Monitor
CAUTION

The heart rate monitor may cause
chafing when used for long periods
of time. To alleviate this issue, apply
an anti‑friction lubricant or gel to
the center of the hard strap where it
contacts your skin.
Do not use gels or lubricants that
contain sunscreen. Do not apply
anti‑friction gel or lubricant on the
electrodes.
nOTE: Your device may include
either a hard strap monitor or a soft
strap monitor.
The heart rate monitor is on standby
and ready to send data. Wear the
heart rate monitor directly on your
skin, just below your breastplate.
It should be snug enough to stay in
place during your run.
FR70 Owner's Manual