Operating The Device; Opening The Front Door; Multi-Monitoring - Siemens SIMATIC IPC647E Operating Instructions Manual

Operating the device

5.1

Opening the front door

Procedure
1. Open the front door with the key.
2. Pull the front door to the side.
5.2

Multi-monitoring

In its delivery state, the device is equipped with integrated graphics interfaces.
You will find the following connection sockets on the rear of the device for connecting
monitors at these graphics interfaces.
• 2 x DP (DisplayPort: labeling on the device: DPP)
• DVI-D
You can find information on the position of the connection sockets and the labeling on the
device in section "Device ports (Page 22)".
To connect several monitors to the device at the same time (Page 62)(multi-monitoring), you
can install a so-called "optional graphics card" (Page 112).
68
Operating Instructions, 09/2022, A5E52254141-AA
5
SIMATIC IPC647E