Toshiba MMK-UP0051DHPL-E Owner's Manual page 17

2. Enter Louver set by press MENU button again
triangle mark will stop blink and setting feature
will be blink instead.
MENU MEN
3. Select Louver swing by press TEMP. button.
Swing
off
Vertical and
V
Horizontal
H
Swing
4. Confirm selected feature by press MENU button
again.
MEN MENU
When feature had selected will return to menu
selection display triangle mark will blink
5. Leave from menu setting display by select exit
and press menu button.
MEN MENU
Leave from menu setting to normal display
(no triangle and feature blink).
16-EN
Blink
°C
°C
Vertical
V
(Up-Down)
Swing
Horizontal
(Left-Right)
H
Swing
°C
.
°C
°C
8.2 Hi POWER operation
To automatically control room temperature and
airflow for faster cooling or heating operation
(except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and
press TEMP. button to select Hi POWER
MEN MENU
2. Confirm selected feature by press MENU button
again.
MEN MENU
3. Leave from menu setting display by select EXIT.
• The Hi POWER mode cannot be activated in the
DRY and FAN ONLY operation and when
the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
- 16 -
Owner's Manual
Blink both triangle and
feature mark Feature
°C
not yet set
Blink only triangle
Feature already set
°C
°C
CAUTION