Maintenance - Husqvarna 525iLXT Operator's Manual

4. Use full speed when you move the product from side
to side to cut grass.
Make sure that the grass trimmer line is parallel to
the ground.
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full speed.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
WARNING:
you do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the start and stop button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
1937 - 002 - 06.12.2022
Clean the trimmer head
Maintenance
Before you do any
Remove the battery before
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Press the stop button.
3. Push the release buttons on the battery and pull the
battery out.
The following is a list of the maintenance steps that
you must do on the product. See
maintenance on page 10 for more information.
Safety instructions for
Daily Weekly Monthly
X
X
X
15