Download Print this page
Sony UWP-C1 Specification Sheet

Sony UWP-C1 Specification Sheet

Uwp series uhf synthesized wireless microphone system

Advertisement

Quick Links

UHF Synthesized Wireless Microphone System
UWP Series

Advertisement

loading

Summary of Contents for Sony UWP-C1

  • Page 1 UHF Synthesized Wireless Microphone System UWP Series...
  • Page 2 • Approximately six hours of continuous operation with two AA-size alkaline (LR6) batteries • Stereo mini jack with monitor-volume control • Supplied shoe-mount adaptor enables easy mounting on Sony camcorders. A microphone- stand adaptor*, belt clip and two output cables (3-pole mini-plug/XLR-type, 3-pole mini- plug stereo mini-plug) are also provided.
  • Page 3 Sony presents the ideal solution for budget-conscious users seeking rock-steady wireless operations — the UWP Series UHF Synthesized Wireless Microphone System. The UWP Series consists of six core elements — a lavalier/bodypack transmitter, a wireless handheld microphone, a plug-on transmitter, a portable tuner, a half-rack-size tuner, and a tuner module.
  • Page 4 Tone Squelch Circuitry When operating a wireless microphone system, it is essential that the tuner not pick up carrier signals transmitted from other systems. In order to avoid this, the UWP Series transmitters transmit a 32 kHz pilot-tone signal along with the audio signal.
  • Page 5 • The lavalier microphone is supplied with a microphone windscreen and microphone-holder clip • The bodypack transmitter is supplied with a belt clip • The portable tuner is supplied with a microphone stand adaptor, shoe-mount adaptor and belt clip for mounting on a camcorder and output cables...
  • Page 6 • The lavalier microphone is supplied with a microphone windscreen and microphone-holder clip • The bodypack transmitter is supplied with a belt clip • Consists of a handheld microphone and tuner module • Suitable for use in PA systems • The handheld microphone is supplied with a...
  • Page 7: Handheld Microphone

    Bodypack Transmitter • Compact and lightweight design • Attenuator function allows adjustment of the microphone-input level to suit each user‘s voice • Selectable RF-output level: 5 mW output is suitable for simultaneous multi-channel operation, while 30 mW output is intended for long-distance transmission •...
  • Page 8: Tuner Module

    Rear panel Tuner Module • Compact, plug-in diversity tuner module: up to two tuner modules can be installed into a Sony all-in-one type presentation mixer/amplifier (SRP-X700P or SRP-X500P), while a maximum of six modules can be installed in the Sony MB-X6 tuner base unit •...
  • Page 9: Optional Accessories

    OPTIONAL ACCESSORIES MB-X6 Tuner Base Unit • Accommodates up to six tuner modules included in the UWP-X1/X2 package, for up to six channels of simultaneous operation • Addition of the WD-850A or WD-880A allows multi-channel operation with even more channels •...
  • Page 10 Frequency response: 40 Hz to 20 kHz • Sensitivity: -39.0 dB (11.2 mV) (0 dB = 1 V/Pa, at 1 kHz) • Microphone head: 5.6 mm (1/4 inch) dia. x 12.5 mm (1/2 inches), approx. 1.5 g (0.05 oz) • Cable length: 1.2 m (3.9 feet) •...
  • Page 11 DC 3.0 V (with two AA-size alkaline (LR6) batteries) Battery life Approx. 6 hours with Sony AA-size alkaline (LR6) batteries at 25 °C (77 °F) at 30 mW output Dimensions (W x H x D) 63 x 100 x 27 mm (2 1/2 x 4 x 1 1/8 inches) Mass Approx.
  • Page 12 Approx. 150 g (5.3 oz) AC/DC adaptor (x1) – Use of Sony wireless devices in the United States of America is regulated by the Federal Communications Commission as described in Parts 15 and 74 of the FCC regulations. Users authorized thereby are required to obtain an appropriate license.

This manual is also suitable for:

Uwp-c2Uwp-c3Uwp-s1Uwp-s2Uwp-x1Uwp-x2